Glue instead of drill
Simply practical
Accessories are part of every bathroom for a coherent overall look and make the care routine easier. KEUCO shower shelves, lotion dispensers, towel holders, etc. are stylish eye-catchers and ensure practical comfort. They remain stable on the wall for many years of daily use - even when glued.
Not drilled - nevertheless holds
In addition to the usual assembly by drilling, KEUCO also offers adhesive fastening of some products. Without drilling, they can be installed on many smooth and rough surfaces with the special adhesive. This causes no drill holes, no dirt and also residue-free disassembly is possible.
User’s Guide
This is how stable adhesive mounting works:
The bonding surfaces - tiles or shower wall - as well as the mounting plates must be thoroughly cleaned before glueing. The KEUCO adhesive set includes a cleaning cloth and an abrasive fleece. Due to the roughened surface, the adhesive adheres even better to the mounting plate.
After the position for the product is defined, the fixing points are marked.
Activate the two-component adhesive in the mixing bag according to the instructions on the packaging.
Then apply a hazelnut-sized amount to the centre of the mounting plate.
Press the mounting plate firmly onto the wall at the previously marked position and allow the adhesive to harden with the cardboard for fixing. The waterproof and ageing-resistant two-component adhesive based on MS polymer is completely cured after just four hours and is characterised by high strength and resilience.
Finally, the wall attachment points can be mounted, in which a shower shelf, for example, can be hung. Easy to mount: No drilling required for assembly.
However, it can also be removed very easily and without residue with a glass scraper and a little silicone cleaner or acetone after the mounting plates have been detached from the wall with a flat tool such as a spatula.
